This machine is very convenient for preparing the test specimens. Put raw materials into iron
die and clamp it between the heating plates with the load actuated by a hydraulic cylinder to
mold the raw materials into specimen for testing in laboratory and being the standard in mass
production.
This machine molds the raw materials into specimens by use of electric heater and hydraulic
motor.
Item |
Specification |
Capacity |
30 Ton |
Temp. |
Room temp. ~200℃ |
Timer |
HMI control, 0~999min |
Heat Plate Area |
30x30 cm |
Parallelism
|
<0.03 mm |
Temp. Uniformity |
<3℃ |
Spacing |
200 mm |
Dimension (W*D*H) |
200x100x180 cm (Reference only) |
Weight |
1500 kg (Reference only) |
Power |
3Ø, AC 220/380/415V 50Hz |